If an email
test bounces your ad will be removed.
Graham Bits to Buy and Sell
Each ad is now individually numbered in the lower left hand corner.
When requesting changes to your ad please quote the ad number.
It has been brought to my attention that several people have been contacted through their listings on this page by persons possibly running a scam using email addresses ending in @yahoo.co.uk or gmail.com. If you are selling an item be sure you receive payment BEFORE you send anything out. If you are buying an item, question the person as to club membership or knowledge of other club members they have dealt with, then contact those members before you deal. Do not supply anyone with any unnecessary personal information. If you have the slightest doubt about a person's sincerity DON'T deal with them. All email addresses on the GP website are purposely hidden to avoid detection by web bots thereby avoiding Spam email for everyone.
There are six Grahams in England and all the owners are known. If they needs parts or want to sell parts they deal with owners in the US or Canada.
There is no stock of Graham parts in the UK
ANOTHER WARNING. If you receive an offer to sell you a "Graham" part or product from outside the USA or Canada contact me and I will attempt to validate the seller.
All Graham ads are FREE!!!
Please make sure your email address is correct and kept up to date.
If an email
test bounces your ad will be removed.
Last update February 07, 2012
| CUSTOM CASTING |
| Reproduction Parts for Graham Paige and most other makes of Cars |
Square Body 1928/1931 Email
| DESCRIPTION | MODEL/YEAR |
| Locking Handles and Escutcheons | All years and Models |
| Non Locking Handles and Escutcheons | All years and Models |
| Door Pull | 1928-1930 6 Cylinder |
| Window Crank | 1928-1930 6 Cylinder |
| Thumb Crank for rear seat window | 1928-1930 6 Cylinder |
| Headlight lever Quadrant | All years 6 Cylinder |
| Throttle Lever Quadrant | All years 6 Cylinder |
| Radiator cap screw on Type | 1st. Series 1928 |
| Radiator Cap | All years, and Models |
| Flying Lady Hood Ornament Mounted | 1928 |
| Same as above but screw on type | 1928 |
| Headlight Rim Ornaments | All Years |
| Spark & Choke Knob Complete with Cable | 1929,30,31 Prosperity Six |
| Crankhole Cover | 1929,30,31 Prosperity Six |
| Robe Rail Brackets | 1929-1930 6 Cylinder |
| Robe Rail Shaft, | 6 & 8 Cylinder |
| Trunk Rack Landau Irons | 6 & 8 Cylinder |
| Rear Compartment Foot Rest Brackets | 1930 1st Series |
| Headlight Stanchions | all |
| Front Bumper Tie Bar | Models 615, 45 & 46 |
| Fender Lamp Base | 1931, |
| Low speed Latch Rod Lifter | 1928-29 4 Speed Transmission |
| Headlight Tie Bar | 1931 |
| Graham Script and Medallion Bumper Clamp | 1931 |
| Hood Hinge Pin Housing (Rad and Cowl Ends) | Big 6 & 8 Cylinder |
| Spark and Choke knobs | Big 6 & 8 Cylinder |
| Square Type Transmission Tower Covers | Big 6 & 8 Cylinder |
| Hubcap Medallions Copper Plated | 1928-1934 |
| Hubcap Medallions Gold Plated | 1928-1934 |
Blue Streak 1934/1935 Email
| DESCRIPTION | MODEL/YEAR |
| Hood Ornament | 1932,1933, &, 1936 |
| Crank hole cover | 1932,1933, &, 1936 |
| Left and right fender moldings | 1932,1933, &, 1936 |
| Left and right rear fender moldings | 1932,1933, &, 1936 |
| Windshield crank out | 1932,1933, &, 1936 |
| Inside window cranks | 1932,1933, &, 1936 |
| Inside door handles | 1932,1933, &, 1936 |
| Outside door handles | 1932,1933, &, 1936 |
| Outside locking door handle | 1932,1933, &, 1936 |
| Rear license Plate "GRAHAM" nameplate | 1932,1933, &, 1936 |
Reo Body 1936/1937 Email
| DESCRIPTION | MODEL/YEAR |
| Locking Outside door Handles | all models |
| Non Locking Outside door Handles | all models |
| Inner door handles | all models |
| Inner window cranks | all models |
| Ashtray Lids Plated | 1937 custom 120 & 116 |
| Ashtray lids ready to paint | 1937 custom 120 & 116 |
| Graham Body Nameplate | 1937 custom 120 only |
| Crank hole covers | 1936, 1937 120 & 116 |
| Hood Ornament | all models |
Sharknose Email
| DESCRIPTION | MODEL/YEAR |
| Sharknose center grill strip | 1938/1939 All Models |
| Sharknose lower grill Emblem | 1938/1939 All Models |
| Sharknose Hoodside Supercharger Scripts | 1938/1939 All Models |
| Sharknose 6 pieces in prime for Instruments | 1938/1939 All Models |
| cluster and glove box door | 1938/1939 All Models |
| Inside Handles | 1938/1939 All Models |
| Inside Window Cranks | 1938/1939 All Models |
| Outside Door handles | 1938/1939 All Models |
| Sharknose Lower Grill Trim V Shape | 1938/1939 All Models |
| Sharknose Lower grill trim U shape | 1940 |
| Sharknose Center Grill Strip | 1940 |
Hollywood Email
| DESCRIPTION | MODEL/YEAR |
| Door locks | 1940-1941 All Models |
| Lower Grill Emblem | 1940-1941 All Models |
| Hoodside scripts | 1940-1941 All Models |
| Rear deck Emblem | 1940-1941 All Models |
| Upper Grill Molding | 1940-1941 All Models |
| Vertical Center Strip | 1940-1941 All Models |
| Radio Scripts | 1940-1941 All Models |
| Inside Door Handles...Indicate Cord or Graham type | 1940-1941 All Models |
| Outside Handles | 1940-1941 All Models |
| These are only a few of the more common parts that people inquire about. If you do not see the part you are looking for, there is a good chance that we have it. By chance that we do not have a part and you have your old original part, even BROKEN, we will invariably be able to make an excellent reproduction. All of the parts are individually custom cast so please allow 8 to 10 weeks for delivery. For price information or other information please contact us: | Michael or Neil Butters
1063 Ontario St. Cobourg Ontario, K9A 3C8 CANADA (905) 372-6926 OR |
| FOR SALE: Main seals for Continental
motors. The seals are machined to specs ready to install.
Cost is $275 plus $15 shipping total $290 in U S funds. Also have a set of 4 inside window cranks in good original condition for 37 Graham. $100 U S plus shipping. 31 Prosperity 6 crank hole covers--chromed ready to install. Cost $50 each plus shipping. Also Horn Rings for the Sharknose Grahams. The cost is $250 US plus shipping. They are triple plated ready to install on the car. 02/25/2009 0001Y |
Michael or Neil Butters
1063 Ontario St. Cobourg Ontario, K9A 3C8 CANADA (905) 372-6926 OR |
| FOR SALE: I have recently started
refurbishing steering wheels for Graham-Bradley Tractors. The
refurbished wheels are made from cast polyurethane. I take the wheels to
be refurbished, remove the old, degraded resin from the metal steering
wheel frame & recast these into molds made from an original mint
condition wheel to produce the finished product, which is an exact
duplicate of the original steering wheel. I will soon have "before & after" pictures available on my website to show the results. http://www.swanmanufacturing.com/ If anyone is interested in more information, you
can contact me. 0002Y |
Steve Swan
62 Crestview Circle Geneseo, IL 61254 (309) 441-6985
|
| FOR SALE: Hollywood and Sharknose jacks.
professional reproduction including shipping $350 (my cost and the 1 I
had left I'm keeping for the '42 Willys I also own). The restoration
shop will make up some more if you still want one. 1941 Hollywood dash
panels reproduced in aluminum. Mine was beyond rescue so we have a
computer directed machine shop here that now can cut these including
the nice raised edge around the radio speaker. They are hand masked
and blasted for the stripes and correct finish. Obviously limited
production. Price including shipping is $225. 01/02/09 0003Y |
Norm Canfield P.O. Box 320 Paradise UT. 84328. 435-245-7515.
|
|
FOR SALE: Parting out 1928 model 619 4dr. sedan. Transmission early 4 speed, gas tank and sending unit robe rail, front and rear bumpers. 06/01/2009 0004Y |
Kevin Conners 530-378-2553
|
|
FOR SALE: Many Graham
Headlight glass and, 1938-39 Graham Sharknose. I now not only have the
Headlight Glass for this car, but also the complete 6 part plated trim.
And complete primed Tail Lights wired with glass for both left and
right. Please see my website at 01/06/2009 0005Y |
Larry |
|
FOR SALE: 1921/22 Paige Chassis. As I recall, there are no bends, breaks or cracks in the frame and other than surface rust it is very good. The wheels are sun-bleached but all spokes are tight in their hubs. The "original" tires are all badly weathered. The body was removed and discarded when it spent time in storage at the Western Development Museum - donated to them and then retrieved when the Museum lost its storage space and suggested they would dispose of it by auction. The steering column is in place but the steering wheel is missing. The engine appears to have all of the manifolds and ancillary parts attached, including the transmission. The "V-ed" radiator and shell installed have some bullet damage and I acquired another at an auction, with shell, which is also damaged. I will check for greater detail and take and forward a digital photo when the snow has melted and I can get back to the chassis. 03/31/2009 0006Y |
Ron Price-Jones |
|
FOR SALE: 1941
Hollywood parts. I have 2 transmissions.
One is rebuilt. I have the drive shaft with the U joints. I have a
complete front end without springs or hubcaps. Also 16 inch tires and original
wheels. I have a complete rear end with 16 inch tires and
original wheels. Also has the E brake cable. I have all the
brake system including master cylinder and the pedal and linkage and
hydraulic lines. I have the clutch pedal and all the clutch linkage. I have a new extra water pump also. Also have a extra dash insert
for 40/41 Hollywood. 12/30/2009 0007Y |
Robert Gordon |
|
FOR SALE: 1940 Graham Hollywood. Chevy V8 - Munci 4 speed, blow proof clutch assembly. 1955-64 Chevy posi rear. Shortened '61 Chevy frame. Rebuilt front end, all poligraphite bushings, new ball joints, tie rod ends, idler arm, 1-1/4" Hotchkis swaybar and links. Total brake rebuild. Drums, front & rear. New driveshaft and joints. All new gas shocks. New 2-1/2" exhaust. Flowmaster mufflers. Paint is Jaguar Flamingo Red. Optima tinted windows. Chrysler Lazer interior in black, front seat bucket, bench in rear. Front bumper not not on car but I have it and the brackets. Appraised at $30,000., best offer. 04/10/2009 0008Y |
John Bottone
610-262-2692 |
|
FOR SALE: a trunk by Watts Morehouse Co. found in my father's attic. It appears to be off a Graham-Paige car. 04/27/2009 0009Y |
Carol Neubauer |
| FOR SALE: 41
Hollywood Graham. This car is complete except for engine and trans. No
body or floor pan rust. Garage kept. This is a "project car
for restoration or modification. $4500 OBO
06/17/2009 0010Y |
David Seltzer |
| FOR SALE: I
have just purchased a 1928 graham panel truck It has been in storage
for 46 years. The only rust through is in the lower cowl on both
sides. The only thing missing on this vehicle is the taillights.
I am selling everything but the frame, body, and headlights.
Please advise if you know someone who would be interested in the
parts. We had the truck running, and drove it around for about an
hour. It runs fine, shifts, and drives good at 15 mph.. It did smoke
some, but not bad. I live right outside of Peoria, Illinois, and the
parts would be for pickup only. We are starting to remove parts, and
would like to find them a good home. It also has the original 19 inch
wood wheels that are in excellent condition, with the GB hubcaps. The
original radiator seem to hold antifreeze with no leaks..
08/12/2009 001Y1 |
Clyde Rossman |
|
FOR SALE: 1926 Graham Brothers truck 90% complete. I will include a 1928 Dodge bros panel truck that is over 90 % complete but is torn apart for restoration. I am willing to sell the pair for $3200 08/12/2009 0012Y |
John Kahnen 661-269-0195 |
|
FOR SALE: Parting out a 1929 615 sedan. Selling the entire drive train, engine runs very well, wire wheels, trunk rack, head & tail lights, radiator and most of the interior including seats, instrument cluster, robe rail, door & window handles & exterior handles. 08/24/2009 0013Y |
Ron 205.936.4233 |
|
FOR SALE: I have a trailer made from the front end of a Graham car. It has the wheels and front suspension. The Hub cap and Beauty Rim are on both Wheels. I would like to sale them to some one that has a Graham that could used them. 08/28/2009 0014Y |
Dwight Holmes |
|
FOR SALE: 1928 Graham-Paige frame, differential, rear suspension and front suspension. Was originally used as a hay wagon. All in excellent condition. PIC1 PIC2 PIC3 PIC4 PIC5 PIC6 PIC7 PIC8 PIC9 09/05/2009 0015Y |
Andy Carlin
805-801-0367 San Luis Obispo, CA |
|
FOR SALE: 1928-1929 Graham-Paige straight eight cowl lights and brackets, all brass construction, needs replating, $250.00 us funds plus shipping. I will ship anywhere on planet earth. 09/12/2009 0016Y |
David |
|
FOR SALE: 1928 Graham-Paige. I have almost a complete car in parts. I have newly rebuilt motor, new radiator, front and rear axels minus tires, drive line, transmission and bell housing, starter, fenders, dash grill shell, doors, etc. 09/25/2009 0017Y |
David Burnett
541-783-7843 Home 541-281-1320 Cell |
|
FOR SALE: I have a couple of Graham-Paige wheels that I would like to sell. They are wooden spoked (thick) and probably a 16” diameter? One is in great shape, the other has a rusted & damaged rim. I wonder if there is someone in the club that would be interested in them. We would be delighted to see a Graham enthusiast have an interest in these wheels. 10/01/2009 0018Y |
Kurt Olsen |
|
FOR SALE: 1920 Paige Glenbrook. New tires, new top, new paint, and new upholstery. Engine is in good shape. $15,000.00 10/05/2009 0019Y |
B. Eckstein |
|
FOR SALE: Graham Brothers Truck. It is a 1 1/2 ton the engine turns over and is almost complete. 10/09/2009 0020Y |
John |
|
FOR SALE: I have four 1941 Hollywood Grahams that very in condition. There are enough parts to build 2 complete all original cars and 2 street rods.
Asking $39,000.
11/09/2009 0021Y |
Frank
805.441.4974 |
|
FOR SALE: 1931 Graham-Paige four-door sedan, has been mechanically restored and is now ready for painting and interior work. Engine is 1958 Buick Supra as is the automatic transmission which came from the same vehicle. The engine has 38,000 miles on it. All electrical, such as generator, lights, starter etc. have been replace and checked by a certified mechanic. Brake system is hydraulic and all wheel cylinders and master cylinder are new and have been fully tested. Must see to fully appreciate. The vehicle was utilized yearly at the Indianapolis 500 mile race to ferry VIP's to and from the event. It was a major attraction with the general public. 12/13/2009 0022Y |
Father Doug Trees
631-741-5484 |
|
FOR SALE: I have an original Graham owner's manual, color blue, 164 pages. This is a factory service manual from warehouse K. The book is in great shape for it's age, the pages are in excellent condition, there is some smudged greased fingerprints on the cover. The manual covers many models from 1935 - 1937. You can check the pictures for specific models covered. I am willing to consider any offers. Please email for further questions. 12/25/2009 0023Y |
Wayne Gibler |
|
FOR SALE:1941 Hollywood Graham Sedan The car is located in Van Nuys California, always garaged and in very good condition. $20,000 OBO. Financing available. 1/13/2010 0024Y |
Joe Fedele
808.667.6767 |
|
FOR SALE: I have a Paige front axle grease seal/ hubcap. It appears to be stainless. The name is in blue enamel. I tinker with old cars and know how hard it is to find parts and know there is probably someone out there that needs one of these. $ is not the issue. I only want shipping . I can send pictures if desired. 2/07/2010 0025Y |
Preston |
|
FOR SALE: Late 20's , early 30's Graham-Paige hub cap. 3.75" diameter $50.00 OBO 2/13/2010 0026Y |
M. Thomas |
|
FOR SALE: I have a 1935 Graham that I'm going to street rod, I will not be using the hood, front bumper, front fenders, radiator, wheels, Chassis, headlight buckets, windshield frame, maybe not the grille, window winders, door handles, speed-o cluster etc. If your interested please contact me. 3/05/2010 0027Y |
Bear
727.226.4025 Crystal River, Florida |
|
FOR SALE: 1935 Graham. Resides in Texas. 3/22/2010 0028Y |
Todd Tschirhart |
|
FOR SALE: I HAVE
10 FRAZER ROTOTILLERS FOR PARTS MILWAUKEE AREA. KNOW
OF ANYBODY INTERESTED IN PARTS ? LOTS OF TINES AND SPRINGS 4/27/2010 0029Y |
|
FOR SALE: I have seven 10 X 12 inch frameable poems by the late Edgar A. Guest. Each of these poems is printed on heavy weight parchment in sepia tone and represents a piece of Americana. They were a promotional gift by a Graham automobile dealer in the Kansas City area many years ago. I think perhaps the envelope containing each of these poems is more valuable than the print. Five of them tout prices of Graham "Sixes" and "Eights" at $785 and $1185. Two shows prices at $845. and $1155. What a bargain!!! Can anyone be interested in these? 4/16/2010 0030Y |
Norma Cameron
623-584-0722 |
|
FOR SALE: 1940 Graham. Located in Puerto Rico 5/22/2010 0031Y |
Sergio |
|
FOR SALE: I am trying to help the daughter of Olan Chiles, a long time Paige collector and active member of AACA for many years. Olan passed away within the past three months and his family would like to dispose of his large collection of Paige literature and other related objects. If you know of anyone who might be interested in these items they may contact her about a more complete inventory at: 5/24/2010 0032Y |
Tina Herrmann 407-301-5981 |
|
FOR SALE: I have a 1940 Graham in great shape ,older restoration Asking $32,000 5/30/2010 0033Y |
Dick Williams
(508) 626-5896 or (508) 533-6767 |
|
FOR SALE: 1934 Graham parts. A new old stock right front fender, two tail lights, rear tire carrier bracket and spare tire cover, two headlights complete with lenses and some smaller items. Pictures available. 5/30/2010 0034Y |
Carl Lockard |
|
FOR SALE: 1927 Graham Brothers truck parts from 1 1/2 ton (maybe 2 ton). Motor, front and rear axles with springs, drive shaft, doors, and some other parts. 6/3/2010 0035Y |
Ken |
|
FOR SALE: I have many vintage, original PAIGE ads for sale. These ads look great on the website , framed and hung in offices at the plant or given as gifts. 6/30/2010 0036Y |
Perry |
|
FOR SALE: 1937
Graham Caviler 95 Business Coupe. This is a rust free California car
that has been in storage for 20 years. The engine seems to be frozen.
I've tried to free it up with no luck. The upholstery is 7/07/2010 0037Y |
Ed Smith 520-432-4858 Bisbee, Az |
|
FOR SALE:
I have recently acquired a wooden scale model of a Graham-Paige car
obtained from the estate of the son of W.H. Neely. I have been told that
this wooden scale model was done at the Graham-Paige design section as
Mr. Neely was very involved with the company. It is large and
heavy.....41" long, 17" wide and 17 1/2" high. I have not
weighed it but it could be over 50 pounds. It is made completely of
wood. There are some pieces missing and some not attached like the head
lights. I have the headlights and other small parts that go to it. 7/16/2010 0038Y |
Scott Crawford |
|
FOR SALE: a Graham
supercharger which I believe is complete. My dad acquired it in the
1950s and has had it in dry storage ever since. Dad and I shared a
love for antique cars, but neither of us ever owned a Graham. He
bought the supercharger hoping to adapt it to a Ford engine, but never
did anything with it. 7/16/2010 0039Y |
John Drake |
|
FOR SALE: LEFT FRONT
FENDER & RIGHT REAR FENDER FOR 1931 GP COUPE $100.00 &
$75.00 Call 7/25/2010 0040Y |
Gord Harris 604-885-5195 |
|
FOR SALE: GRAHAM/GRAHAM-PAIGE Engine and V.I.N. Plates 1928 THRU 1933 GRAHAM-PAIGE ENGINE VIN PLATES. EXCELLENT QUALITY, COMPUTER LASER ETCHING PROCESS, SUPERB DETAIL. $55.00 SET OF 5PCS. POST PAID US & CANADA. ADD $5.00 OVERSEAS MAIL. 1934 THRU 1941 GRAHAM SET OF 3PCS $50.00 POST PAID US & CANADA. ADD $5.00 OVERSEAS MAIL NEW!!! 1948 THRU 1955 KAIZER FRAZER SUPERSONIC ENGINE I.D PLATE $10.00 POST PAID US & CANADA. ADD $5.00 OVERSEAS MAIL Also: 1929-1930
Parts to clear All prices + freight 2 Radiator shells require plating $75.00 each 1 radiator $100.00 1 radiator needs fin straightening $75.00 NOS right front fender $300.00 1 pair of headlights in very good condition no wings $200.00 Rear motor mounts for 612 & 8 cyl $30.00 Crank Case $40.00 Complete rear ¼ bumper $75.00 Rear bumper blades only $50.00 1 pair of cowl lights One has cracks $80.00 Cowl light arms 6 & 8 cyl $30.00 pr Brake parts hose to cylinder 4 for $60.00 Fuse block $15.00 Frame for 612 $75.00 Frame for 615 $75.00 1 only 1930 headlight bar emblem, very good condition $75.00 Good supply of VIN plates 1928-1941. Complete sets $55.00 ea 29/30 radiator grill excellent condition $75.00 plus shipping 1929/30 EMERGENCY BRAKE LEVER CHROMED, COMPLETE $35.00 1929.....615 REAR BRAKE DRUM WIRE WHEEL TYPE $35.00 1929/31 FOLD DOWN TRUNK REQUIRES RESTORING. $150.00 FUEL PUMP GLASS BOWL $15.00
08/03/2010 0041Y |
Send
cheque or money order to: William Conley 32 Valleyview Drive RR4 Cobourg, ON. K9J 4J7 |
|
FOR SALE: I recently found 3 Graham-Paige cigars in my fathers fridge. I remember him showing me them when I was a kid. They are wrapped together in a band with the logo on it. 8/01/2010 0042Y |
Chris Huebner |
|
FOR SALE: a restored 1937 Graham supercharged engine and trans for sale. This engine and trans was restored for a museum and is on a custom run stand. The unit is located in Prescott Arizona, The asking price is $6500.00 for the complete set up and local pick up and inspection is preferred but shipping can be arranged at buyers expense. 8/16/2010 0043Y |
Robert Walters 928-420-2771 |
|
FOR SALE: Early
Graham Brothers truck radiator shell and badge. Has quite heavy surface
rust but no perforations, or no noticeable denting. I think with
some sand blasting, polishing and fresh chrome it would look like
new again. Emblem is in nice condition. 8/19/2010 0044Y |
Len |
|
FOR SALE: 1941 Graham Hollywood on Craigslist 8/22/2010 0045Y |
|
FOR SALE: Reproduction serial number tags for Graham engines in both cars and tractors from 1936-1941, possibly earlier. Identical to originals. Stainless steel with black background. Ready for your engine's serial number to be stamped in. $20 each, shipping included. 8/28/2010 0046Y |
James Fred |
|
FOR SALE: Graham supercharger. The unit not the car. 9/02/2010 0047Y |
Mark |
|
FOR SALE: 1935 Graham in Mexico http://www.autoclasico.com.mx/site/?p=15&id_fol_auto=5320 9/02/2010 0048Y |
|
FOR SALE: Graham headlight bar PIC1 PIC2 PIC3 PIC4 PIC5 PIC6 PIC7 PIC8 PIC9 PIC10 PIC11 09/12/10 0049Y |
M.R. Simpers
(321) 636-2456 |
|
FOR SALE: I have a NOS Stewart Warner amp/fuel gauge for a Graham Hollywood. It is mint and I guarantee you will not find one nicer. This is the unit with a black face and beige divider. It's for TRADE ONLY for comparable parts for my Hupp Skylark. I really need a nice set of seats for a Skylark/Hollywood but contact me whatever you may have for a quick reply. 09/14/10 0050Y |
Bob Storey
717-637-7710 |
|
FOR SALE: I have a 1929 Graham page that has the motor and trany rebuilt but is missing the hood and four doors asking $ 800.00 for it. I also have a 1939 Sharknose Graham 97 complete that's supercharged and has overdrive asking $ 2000.00 for it 9/18/2010 0051Y |
Don |
|
FOR SALE: 1937
Graham 4 door "Supercharger" Straight 6 engine. All original
and well cared for. This is a unique car with an interesting history; an
eye catching car that everyone stops to ask you about! Looks and runs
great! 31,345 original miles. Tires in very good condition. Asking
$20,700 09/18/2010 0052Y |
Joanne
(813)917-9205 |
|
FOR SALE: 1941 Graham Hollywood being stripped for parts. I am stripping what remains of this car for parts needed in another Graham. Please send your request for wants/needs and I will see what remains to be sold. 9/19/2010 0053Y |
Dennis Barney |
|
FOR SALE: Making Reproduction Tail Light Lenses. 6 Cylinder Graham-Paige and Graham. 8 Cylinder Graham-Paige and Graham.
9/19/2010 0054Y |
Michael or Neil Butters
1063 Ontario St. Cobourg Ontario, K9A 3C8 CANADA (905) 372-6926 OR |
|
FOR SALE: One pair of New Old Stock Hupp Skylark/Graham Hollywood short shaft out side door handles in original envelopes. These are for the front doors only, $150 + 5.00 shipping and insurance 10/03/2010 0055Y |
Robert Storey 717-637-7710 |
|
FOR SALE: GRAHAM VEHICLES FOR
1933
Blue Streak convertible, rumble seat, Supercharged engine, leather
interior and rumble seat, complete engine overhaul, needs new paint,
(one of a kind model as documented by Bill McCall over the past 40
years) 100 % complete, as seen in New York GOCI Meet in 2004/2005
$ 52,000 INVESTED, OR BEST OFFER 1929 Graham Paige square body
Model 612 four door sedan, 6 cylinder, all complete, needs total
restoration of existing pieces, as seen in 1997 in Ludlow VT GOCI Meet
$ 5,000 INVESTED, OR BEST OFFER MISCELLANEOUS ITEMS: GRAHAM PAIGE Porcelain Sign –
two sided, only known original remaining, as seen in 1997 at Ludlow VT
GOCI Meet $5,000 OR BEST OFFER 10/24/2010 0056Y |
Jeff Graham
Cell 802-356-2423 |
|
FOR SALE: a nice 1938-1939 Sharknose "Flying Knight" Hood ornament/Hood latch. If anyone is interested please call feel free to email or call me. I'm asking $300, 11/3/2010 0057Y |
GEORGE MINTON 832-754-6822 |
|
FOR SALE: Graham Brothers truck frame 11/3/2010 0058Y |
Jerry |
|
FOR SALE: 1930's Graham super charged engine. I would like $600 for it. It is rough and set around for years so will need total rebuild.. Also shipping would be up to the buyer to handle.. Thanks, 11/6/2010 0059Y |
Ben |
|
FOR SALE: a tail light lens from a 1929 Graham-Paige Model 615. Also the lower clear lens that goes beneath the red lens. This lens has a small chip which I know won't show once it’s install. Also have a reference book first edition model 615 and a hub cap that is in fair condition with a few small dents. All 4 for $450.00 obo 11/10/2010 0060Y |
Wendy
314-437-8458 |
|
FOR SALE: a Graham Paige 610 reference book in reasonable condition. 12/16/2010 0061Y |
Gary |
|
FOR SALE: an original Graham owners manual for 1935-1937. It is brand new. Perfect shape. 01/14/2011 0062Y |
Michael |
|
FOR SALE: I just acquired a small lot of Graham parts and would like to get them in the hands of people who can use them. Some are labeled 1936. They include rebuilt fuel pump, Zenith carb, transmission and suspension parts, water pump, pulleys, etc. 01/18/2011 0063Y |
Dennis
307-254-0119 |
|
FOR SALE: a deck, trunk lid for a 38 coupe. $800. or may trade for 40 Ford deck lid. 01/30/2011 0064Y |
Bill
Sparta Wi |
|
FOR SALE: I have new hubcaps for 1942 Hollywoods or Skylarks. These are brand new, manufactured to the original specifications. 02/23/2011 0065Y |
Scott Bawden |
|
FOR SALE: Graham Owner's Manual Years 1935-1937, Models 74, 81, 83, 76, 77, 91, 86, 89, 87, 88. In Addition, Models 96, 07, 107, 108. This manual has a blue cover and is in good shape. Please contact 02/26/2011 0066Y |
Bryan Hurt
423-834-0943 |
|
FOR SALE: 2 Grahams for sale $2500 for the pair. One has the super charger. 03/11/2011 0067Y |
Lindsay King
Arkansas 72469 870 307-5322 |
|
FOR SALE:
1931 GRAHAM MODEL 54. THE ENGINE WAS REBUILT BY A MAN IN NY. IT IS
ALL ORIGINAL AND IN THE CRATE. THE CAR IS RUST FREE. IT HAS BEEN IN THE
FAMILY FOR 35 YRS IN A CONTROLLED ENVIRONMENT. 03/17/2011 0068Y |
BRUCE 732-882-3940 |
|
FOR SALE: 1932 Bluestreak Graham for sale. Asking $27,500.00 PIC1 PIC2 PIC3 PIC4 PIC5 PIC6 PIC7 PIC8 03/17/2011 0069Y |
Kenneth Graham
619-267-7566 |
|
FOR SALE: my
name is Gary Chiles, my father was Olan Chiles. He passed away last year
and owned multiple Paiges growing up. I have a couple boxes of parts
from his 22 Daytona speedster, a fairly rare car. Do you guys know
anyone that would be interested. Thank you very much! 03/22/2011 0070Y |
Gary Chiles
619.997.7236 |
|
FOR SALE: 1928 Graham-Paige model 610 Business coupe 04/02/2011 0071Y |
Tim |
|
FOR SALE: Here is a very rare Supercharged 1941 Hollywood Graham. Very few of these cars remain today in original condition many have been street rodded. This was a one family owned car when I purchased it last year. The car sat for many years, and was not running when I got it. Since then I have gotten the car to run and it sounds great. The gas tank has been cleaned and sealed. I have put in all new brakes, wheel cylinders, master cylinder. Now they have to be bled. Over the last year I have collected many parts and the car is 98% complete. The body on the car is very sound and solid. There is only minor rust on the bottom of the rear doors. The floors are solid with a little rust in the corners of the trunk. Car does go into gear and yard drives. This is a great car to restore because it is so complete and has all original parts. Many extra parts included. $11,500.00 or best offer 04/13/2011 0072Y |
Frank
917-847-0065 |
|
FOR SALE: I
have a 1935 Graham Standard 6-cylinder Sedan for sale in South Africa -
see photographs! Fully restored a few years
back and in good condition. Converted to 12 volt battery system.
Paintwork good with no rust and very good interior. Quiet motor and runs
very smoothly. First owner in the Virginia area of the Free State from
1935 to 1959; From there to Standerton in the Gauteng area until 1971,
thereafter to Bloemfontein in the Free State until 1989, and finally to
the Karoo area until 2010. Very rare model in South Africa and a most
collectible vehicle. The car drives extremely well and everything works.
The electrics have been upgraded to a 12V-system. The asking price
excluding shipping is US$13,500. All export documentation, insurance and
shipping can be organized at the buyers expense. PIC1 PIC2 PIC3 PIC4 PIC5 PIC6 PIC7 PIC8 PIC9 PIC10 PIC11 PIC12 PIC13 PIC14 PIC15 PIC16 PIC17 PIC18 PIC19 PIC20 PIC21 PIC22 04/13/2011 0073Y |
Peter Jackson
Cape Town, South Africa |
|
FOR SALE: Graham-Paige piece of art. Done in 14 carat leaf $3,000 . Gerie Bagladi done in 1976 03/17/2011 0074Y |
724-837-6453 |
|
FOR SALE: 1927 Graham Bros truck Work was started on the Old Truck's engine in 2009 and it is garaged where the work was being done in Northern California. It has been garaged all it's life in California. My husband's grandfather bought the truck new in 1927 to haul material to jobsites. He was a custom home builder. The truck was completely restored in the 60s and won prizes. During the recent work on the truck, we had a magnetic sign made that shows the names of all three generations, Albert, Owen, and Gregg Haskell - and the start-up dates of their businesses. We have had it evaluated and I can supply an email copy of the report by West Coast Auto Appraisals which contains detailed photos. His evaluation was $10 - $12,000. We are asking $9,000.00 OBO - delivery NOT included. The registration is current, and the vehicle is available for inspection by appointment in Hollister, CA. 05/07/2011 0075Y |
A Haskell 503-763-6337
|
|
FOR SALE: 1934 GRAHAM SEDAN, MODEL 69, SUPERCHARGED 8 CYL. 98% COMPLETE CAR. ALL ORIGINAL AND READY FOR RESTORATION. MOTOR AND SUPERCHARGER REBUILT A FEW YEARS AGO WITH NEW HEAD, BUT HARDLY DRIVEN AT ALL. PROBABLY NEEDS CARB WORK TO GET IT RUNNING WELL. WOULD BE WILLING TO DELIVER TO THE ANNUAL CAR MEETING IN MICHIGAN. $12,500. PIC1 PIC2 PIC3 PIC4 PIC5 PIC6 PIC7 PIC8 05/09/2011 0076Y |
ROBERT
214-563-9050. |
|
FOR SALE: 1939
Graham Sharknose. Complete running gear intact, body in also complete
but very rusted. Needs complete restoration. ACCEPTING OFFERS. PIC1 PIC2 PIC3 PIC4 PIC5 PIC6 PIC7 PIC8 PIC9 PIC10 PIC11 PIC12 PIC13 PIC14 05/19/2011 0077Y |
|
FOR SALE: 1937 graham cavalier 2 dr sedan project. Totally apart but overall pretty solid. Offering as whole project before I part it. call for details $4500/make offer 05/25/2011 0078Y |
Ed
410 371 8812 |
|
FOR SALE: 2009
Carson Enclosed Car Trailer. Price: $5500. 8 1/2' x 20', v nose. I had
the trailer manufactured 12" higher than normal to accommodate most
trucks. rear door 7'3" high 05/28/2011 0079Y |
Royce Dunn
619-781-8339 |
|
FOR SALE: 1941
Graham Hollywood, RARE only 1,378 built. Own a piece of history in
classic hot rod fashion. 330 Horsepower, Chevrolet 350 V-8 with
automatic overdrive 700R4 transmission. Power Steering. Ride in style.
Drives like a dream. Car was built for the Connoisseur/Collector
in mind. Chassis Engineering independent front end assembly, air
conditioning, black leather interior, original gauges re-calibrated.
Attention grabbing Dark Toreador Metallic paint. 6200 miles since
completion. Car is as spotless today as it was when it was
built. Ready for your collection or to drive across country
in style! Contact for an appointment to view the automobile
$95,000 This seller will assist to ensure a reliable and safe transportation of the 1941 Graham Hollywood to the buyer. 6/01/2011 0080Y |
Jill
or Larry
905-725-6413 |
|
FOR SALE: 1934 Graham sedan rolling chassis, and body, no drive train, nor much interior. Very worthy restoration project, or street rod. See similar car online, street rod, for $75K IN ATL. Dixie dream rods also has pics of that car. Buy this one for much less. Best Offer, must sell. 06/27/2011 0081Y |
Jim |
|
FOR SALE: 1938
Graham Model 97 supercharged shark nose 4 door sedan. 6 cylinder
supercharged motor. 3 speed floor shift overdrive transmission.
Has very nice chrome and stainless steel trim. 15" chrome
rims. Good tires. Engine runs well. Running boards have been
deleted but are available. Needs complete upholstery. The
brakes need some attention. Car has been garage stored for 3
years. This vehicle is very rare and for this year they only made
around 4500 of them. Ill health forces to sell vehicle as I am
unable to work on it anymore. $14,000.00 or
will consider any reasonable offer. Buyer
will be responsible for vehicle pick-up. 06/27/2011 0082Y |
DON STEVENS
602-999-2727 |
|
FOR SALE: 1927 Graham-Paige super-charger unit (not the car) 08/20/2011 0083Y |
|
FOR SALE: 1941 HUPMOBILE “SKYLARK” (MODEL R) Click HERE for description PIC1 PIC2 PIC3 PIC4 PIC5 PIC6 PIC7 PIC8 PIC9 PIC10 PIC11 PIC12 PIC13 PIC14 PIC15 PIC16 PIC17 PIC18 PIC19 PIC20 PIC21 PIC22 PIC23 PIC24 09/28/2011 0084Y |
Steve Hurley |
|
FOR SALE: For
1929/30 model 612/46 Detroit lubricator carburetor $175.00 For
1929 model 612/615 plug wire loom holder $25.00
For 29/30 model 612/46 etc. NOS axel shafts $100each For 1929/instrument panel fascia with glass NO gauges $15.00 each 10/02/2011 0085Y |
William Conley 32 Valleyview Drive RR4 Cobourg, ON. K9J 4J7 |
|
FOR SALE: a 1937 Graham Cavalier for $12,500.00 OBO. This car is in great condition, all interior is original, has clock, radio, heater, and signal lights. I stopped driving it about 2 years ago due to health reasons, so it has been covered and parked in my garage. 10/06/2011 0086Y |
Ronald Drennon
843-729-7213 (Cell) 843-553-8201 (Home). |
|
FOR SALE:
(in Europe): 1929 Graham-Paige model 612 10/14/2011 0087Y |
Fredrik Jonsson |
|
FOR SALE: a set of engine side panels for a 1934 Graham. PIC1 PIC2 PIC3 PIC4 PIC5 PIC6 PIC7 10/17/2011 0088Y |
Vincent |
|
FOR SALE: My parents are currently living in South Africa and want to sell their 1929 Graham Paige. Reason being they can’t drive it anymore at their age and asked me to see if there would be any interest from your club. My dad restored it some years ago. I moved my parents to a retirement village last week and took some pictures during my stay in South Africa, I live in Melbourne Australia. PIC1 PIC2 PIC3 PIC4 PIC5 PIC6 PIC7 PIC8 PIC9 PIC10 PIC11 PIC12 PIC13 11/09/2011 0089Y |
M. Mitchley Australia +61 431171185 |
|
FOR SALE: 1941
Hollywood. Many of the '41 Hollywood parts have been sold. What remains
is the rolling chassis and complete body, which is quite sound. The
honey comb radiator and heater still need a home too. VERY VERY
soon the owner, Bill Magavern will be loosing storage and this
time the car will be sitting outside. Bill has requested I do what
I can to find a new owner for the Hollywood in its present
state. I have the hood and trunk lid in my storage area and they are so
nice. Every piece of stainless, unblemished, remains on the hood along
with the RH and LH 716 992 4273 or 716 856 3500 PIC1 PIC2 PIC3 PIC4 PIC5 PIC6 PIC7 PIC8 PIC9 PIC10 PIC11 PIC12 PIC13 PIC14 PIC15 PIC16 11/09/2011 0090Y |
Charlie Schwendler 716.662.9159 ....after 7 pm |
|
FOR SALE:
I have a 1929 valid Illinois title for an 8 cylinder body
style HR. It was originally for a hearse but HR could easily now be a
hot rod. Last title date of issue was 1978 in my name and current
address. Looking for $25.00 11/29/2011 0091Y |
James Loftus |
|
FOR SALE: Four (4) Graham Hub Caps for sale. I don’t know for what year. Three (3) are all original and one (1) reproduction. The inside diameter of the hub caps for mounting hole are six (6) inches across. There is only surface rust on the inside. Outside Graham labels emblems on the three (3) hub caps are all original brass. Outside covers are in very good condition and were wire brushed cleaned. Asking $125.00 for all 4 hub caps plus shipping. 12/22/2011 0092Y |
Robert J. Ruggiero
1-860-227-6104 |
|
FOR SALE: 1937 Graham Cavalier 4 door slant back parts. Complete grille assembly,4 doors (doors have been chopped 3 inches, but could be used to repair yours with bad bottoms) Doors are very solid and contain window and latch mech. Trunk lid, (has a third brake light in place of the emblem in the center. Would easily be filled or your emblem will cover it) Front fenders fair condition, headlights with horn assemblies and lenses, gas tank, bumpers (front and rear), wing windows (exterior type), tail lights (left and right with lenses), complete heater (nice condition), hubcaps (four of them), hood sides with emblems (cut along the top to remove them from hood) I also have the complete cowl section with dash from this car. Dash has gauges and glove box door, trim etc.. will cut the dash out if you need these parts. This was an abandoned street rod project from many years ago, I acquired these parts and I will hope you guys in the club will find use for them. I really don’t want to separate these items. I would like to sell as a complete lot. $1500 takes all. Buyer is responsible for pick up if the whole lot is bought. If this comes to separating the parts to sell. I will try to ship parts out to you thru UPS or FedEx. Items located between Erie PA. and Buffalo NY
01/08/2012 0093Y |
Greg Harle jr 716-782-2142 |
|
FOR SALE: 1.) I
have two (2) Graham wheels for sale. They are (qty 40) metal
spokes, 19 inch rim diameter. Both are in great shape; They
were in a fire, no damaged to the rims. They came off a 1931 Graham
parts car. See photos. Asking $60 for the pair plus
shipping. 2.) I
have Seven (7) Graham Hubcaps for sale. Five
(5) hub caps are all original with the brass emblems, two (2) are repro,
plus spare cap parts. All hubcaps are in great shape with minor
scratches and dents; Surface rust on the inside. Mounting inside diameter
is 6 1/2 inches. See photos. Asking $270.00 for all plus
shipping. 01/14/2012 0094Y |
Bob
860-227-6104
|
Graham Bits Wanted
|
WANTED: A complete set of
leaf spring bushings for a 1940 Graham 107.
05/06/09 0001B |
Norm Pence
303 427-8435 |
|
WANTED:
a copy of an engine manual or schematics
(specifications) for my 1930 Graham Paige Model 822 car, so my mechanic
can rebuild this engine for me.
05/15/09 0002B |
Terry Reid |
|
WANTED:
They did offer fender skirts for the '37. Does anyone
have a pair on their car and does anyone have one for a pattern to
borrow etc..
05/28/09 0003B |
Lee Noga |
|
WANTED:
a radiator cap for a 1926 Graham Bros ¾ ton tray back
Truck. 06/03/09 0004B |
Frank Viskovich
|
|
WANTED: Graham
Club emblem for license plate topper. 06/27/09 0005B |
Sam Flowers |
|
WANTED: I'm
looking for a 1936 or 1937 Graham engine block or complete
engine with the block casting number being F600A611 (that number can be
found cast into the right side of the block just above the oil pan towards
the front of the motor). This engine was used in 1937 Graham
Bradley tractors and hoping and wondering if it was also used
in any Graham Cars?? Please can anyone HELP me???!! 07/26/09 0006B |
James Fred |
|
WANTED: the
head light switch for my 1929 GP. It fits on the end of the steering
wheel and was made by Briggs and Stratton of Milwaukee WS. It has
6 connectors and is operated by a lever on the steering wheel. What
other information might be needed to find this light switch. 07/26/09 0007B |
Lorna |
|
WANTED: for
Graham Hollywood or Hupmobile Skylark, the left and right front window assemblies
complete, ie: Chromed frames, runners, rubber parts, glass etc. They
must be restorable condition. Good prices paid for good parts ! If you
have one or the other part, or know someone that will sell them, please
let me know with pic¹s and prices, please. 08/03/09 0008B |
Philipp Stettler |
|
WANTED: 1940
or 1941 Hollywood Bumper Guards with notch for the top bar. I need 3
that can be rechromed and If interested, I have Hollywood parts to
trade? 08/14/09 0009B |
Bob Gordon |
|
WANTED: A
rear view mirror for a Sharknose with mount, that bolts to windshield
frame. 09/13/09 0010B |
Steve Howard
425-275-2398 |
|
WANTED: I
had a very old recording of the Graham-Paige March on an old disc of 78
R per minute. But the disc is broken now and I want to know if that
music is still available on CD or something like that. 10/30/09 0011B |
Jan van Zwetselaar |
|
WANTED: Searching
for a Graham Panel truck to purchase. Any help locating one would be
appreciated. 0012B |
Alec Buchan |
|
WANTED: for a
39 Sharknose COUPE; Door vent window frames. 11/08/09 0013B |
Dennis Cusack
212.988.4379 |
|
WANTED: Right
front locking door handle (with key) for a 1929 615 sedan. 612's are
probably the same. 11/08/09 0014B |
Andy Wittenborn
914.941.2744 |
|
WANTED: water
distribution tube for a 1938 Graham "supercharged" engine or
exact specifications as to how to make it; size of holes, etc. Any and
all information will be helpful. 11/25/09 0015B |
|
WANTED: I am
interested in purchasing a 38 39 40 Sharknose preferably a two door but
would take a four door. Can you be of any help? I like to restore cars
or will buy a restored one.
12/08/09 0016B |
Mike Samson 847-987-2928 |
|
WANTED: Looking
to purchase a 1940-41 Graham Hollywood Resto-rod. West Coast preferred.
12/13/09 0017B |
Dennis Barney |
|
WANTED: I have a
1935 Graham 4 door touring sedan. I purchased the car recently without a
drivers side front bumper half. The car was also missing all 4
hub caps. Can anyone help me out with these parts, I would appreciate it
very much.
12/22/09 0018B |
Carl Peronto
608-212-2466 |
|
WANTED: Repair/Parts/Service
manual for engine used in the 1928/1929 Graham Paige Model 619 or 629.
A copy would be great.
12/25/09 0019B |
Tom Timmins |
|
WANTED: Need a
temperature gauge and matching sender unit. Gauge reads cold to
left when power is on and hot to right with power off. For 1939 Sharknose
with 6 cylinder super charged engine. 01/13/10 0020B |
Gary Spence |
|
WANTED: Emergency brake cable with
sheath in good condition for a 1940-41 Graham Hollywood. 01/19/10 0021B |
Dale Benjamin |
|
WANTED: front fenders for my 1937 Graham
116 4 door sedan. I also need an oil filter housing and a good drivers
side grille 01/24/10 0022B |
Corky Heuring |
|
WANTED: For 1930 early series GP 615
sedan: 1. left front Delco Remy single action shock 2.
light switch at the bottom of the steering column 3. 4
bumper bolts, or rental of one to reproduce them 4.
scalloped sheet metal door garnishes under each window frame (there are
4, I have only left rear) and 5. the 4 aluminum sill plates which
screw to floor beneath each door. 02/13/10 0023B |
Jefferson Schott |
|
WANTED: 1939
Exhaust manifolds for S/C engine. Also need a Carter 413S carburetor.
Please email me if you have either for sale. 02/18/10 0024B |
Dennis Cusack |
|
WANTED: for
a 1929 Graham Paige model 612-6cyl a crankshaft rear
seal. Please let me know if you have one or know how to make one. 03/09/10 0025B |
George L Morales |
|
WANTED: chassis
for a 1936 Graham 110 or any 1936/37 Graham. 03/19/10 0026B |
Lee Noga |
|
WANTED: Need
4 Grease Cup Hub Caps with GB imprinted for a 1927 Graham Brothers
Pick-up 03/29/10 0027B |
Gregg Haskell |
|
WANTED: 38-40
Graham Shark Nose parts car with title. Ok if interior is missing. 05/09/10 0028B |
Mike Markin |
|
WANTED: Graham
crusader coupe or any shark nose. Would prefer a project car. 06/26/10 0029B |
Ken Pielechowski
716 -870-2059 |
|
WANTED: I am
looking for a parts catalog for tiller, B-1-6. I am wondering if
you have one or know where I can get one.
06/30/10 0030B |
Susan Petraitis |
|
WANTED: Parts for a 1935
Graham model 74. I am restoring a 1935 Graham model 74 and as I am
putting the car back together I can not find the
rims that go on the headlight buckets. I also need a good set of
rubber grommets that connect the front bumper to the fenders. Also
looking for the brackets and hardware that are on the
firewall to connect to the hood. They were off when I got the car
so I am not sure what they look like. If anyone has information on what
they look like or pictures of how they attach please email
me. I am also looking for a place to purchase the hidum for the
roof top. I have the roof on but can't seem to
find the right size hidum to put in the groove. Any
suggestions welcome. Also looking for the windshield opening lever
in decent condition. 07/12/10 0031B |
Calvin Kostamo
906-353-6171 |
|
WANTED: We have Graham Paige
vintage car, model 1930/11, type 849, 6 Cylinder. We need a Carburetor
Part no : 1237395
07/21/10 0032B |
RAKESH WAGHELA
INDIA. |
|
WANTED:
I am looking for a Graham in almost any shape to restore from the
ground up. Preferably a 4 dr. 38 -40, but any year is fine. 07/21/10 0033B |
Matthew Dorn |
|
WANTED: I
have just purchased a 41 Hollywood Graham and am in need of body parts
or a parts car. Any information would be great. 07/22/10 0034B |
|
WANTED: for Graham Hollywood. Windscreen frames in good condition, no rust, but tired plating is ok. I will pay fair prices for good ones.
Also I would like to contact any
Hupmobile Skylark , Graham Hollywood and Cord 810/812 sedan owners
interested in buying a set of nice reproduction windshield frames for
their cars. I believe that if we can arrange enough orders, this
manufacturer will produce a run for us. He has produced them in the past
and they have fitted very nicely. 0035B |
Philipp A. Stettler
Switzerland |
|
WANTED: for 1941
Skylark, a nice set of seats, front and rear with enough material left
to make good patterns but I will consider ALL. Also one front and one
rear door panel in the same condition. I'm always buying anything
related to these cars, parts, literature you name it. 8/16/10 0036B |
Bob Storey
717-637-7710 |
|
WANTED: I am
located near Winnipeg, Manitoba, and I would like to place a want ad for
any year Graham supercharger. Not the car, just the supercharger
setup. Does not need to be in perfect condition, but turning is
preferable. Also I will be more likely to purchase one with the drive
pulley setup. May buy multiple sets to rebuild and sell. I may also be
interested in purchasing an inline eight, if it's not too far for me to
travel, and the price is right. 8/16/10 0037B |
Alain Bouchard |
|
WANTED: I am restoring a 1937 Cavalier Business Coupe and I am looking for any of the available options from that year. In particular I'm looking for the following items. Chrome side trim along the hood and under the side windows Chrome trim that runs on the side of the running boards Heater unit that is square and has the port for defroster and all hardware including the dash defroster fixture Optional custom steering wheel, Banjo type Clock for glove box Any
part of a rumble seat or its hardware 9/09/10 0038B |
Bob Showler |
|
WANTED: FOR MY 41 GRAHAM HOLLYWOOD: CLUTCH PEDAL PAD VENT WINDOWS COMPLETE FRONT & REAR TRUNK RUBBER MOULDING BOTH TAIL LIGHTS COMPLETE OR AT
LEAST LENSES (CB333) 9/12/10 0039B |
GEORGE ELLIOTT
1-317-877-6669 |
|
WANTED: I'm looking for a wheel for a 1923 Dodge Graham Brother Fire Truck. The wheel is a 24" by 4" split rim. Any help would be greatly appreciated. It looks like the rim in the pictures PIC1
PIC2 PIC3
PIC4 PIC5
PIC6 PIC7 9/21/10 0040B |
Sal Rangel
432-336-4643 |
|
WANTED: Front
seat assembly from a 1930/31 6 cylinder Graham with all its movable
hardware as I want to put it in my 1929 model 615. Having a
fixed-in-place front seat was OK when I was much younger, but now find
it very tiring to drive. Seat could be shipped via Greyhound 9/29/10 0041B |
Andy Wittenborn
914 941-2744 |
|
WANTED: a
tail light stalk for a 1929 Graham-Paige
612 0042B |
Michael Rosser |
|
WANTED: a 1938
Graham. A project car would be fine. 0043B |
M. CARTWRIGHT |
|
WANTED: For 1940 Graham Sharknose Model 107 4 stainless steel trim pieces for the rocker panels and 4 hubcaps. Yale locks for ignition, glove compartment, front passenger door, and trunk. A set of Trippe lights. 0044B |
Norm Pence 303-427-8435 |
|
WANTED: all gauges except for the speedo for a 1940 Graham Hollywood. They need not be in working order. 0045B |
Kyle |
|
WANTED: Trunk lid support for a 41 Hollywood. 0046B |
Bob Gordon 714-524-1095 |
|
WANTED: a grille for a 1936 Graham 4 door Touring sedan 0047B |
Gary (516) 650-5675 |
|
WANTED: a 1931 Prosperity 6 grill. I do not know if others fit. I have one that needs repairs so would like to find one that is usable 0048B |
Jack 970-641-5578 |
|
WANTED: 1940/ 41
GRAHAM HOLLYWOOD. DON'T NEED ENGINE , OR TRANSMISSION. 12/12/10 0049B |
Les Gray |
|
WANTED: 1 only - Front or Rear (same fitting) Bumper Guard/ Bumper Overider - 1936 Graham 110 Supercharger. It has to be straight but chrome is not an issue. 0050B |
Tom Lonergan +61 2 4388 1196 AUSTRALIA |
|
WANTED: for a 1941 Hollywood: High beam jewel, and the air shroud for fuel pump, runs along side the block to the fuel pump 0051B |
|
WANTED: 1941 Hollywood Graham parts needed. 4
only 16'" wheels for my Hollywood.
Please email condition and price. 1/30/11 0052B |
Frank
917-847-0065 |
|
WANTED: 1941 Hollywood front windshield frames and rubber 2/22/11 0053B |
Scott Bawden |
|
WANTED: For a GRAHAM PAIGE MODEL 615 - year 1929 - 4 wheel caps - phare complete - radiator and grille - front bumper tie bar 2/22/11 0054B |
Marc Verscheure |
|
WANTED: 1940 Graham parts: Someone to restore clock and odometer/speedometer for 1940 Graham model 107. Need new hands for both pieces. Also windshield wiper towers and cross arms from wiper tower to wiper motor. Linkage from gas pedal to supercharger and carburetor. 5 new/NOS beauty rings for 16 inch wheels. Yale lock for trunk handle. 2/28/11 0055B |
Norm Pence
303 427-8435 |
|
WANTED: Looking for a pair of rear fenders for 32 Graham Model 56. I believe that other years will fit. 3/17/11 0056B |
Jack
970-641-5578 |
|
WANTED: I am interested in spare parts for a 1938 Graham Supercharger 6 cylinder. I need one head gasket, one alloy cylinder head, all four rims. And the front bumper has two "spears" (over riders) that I need. 4/2/11 0057B |
Joon Lyberg |
|
WANTED:
looking for head or an engine to my 1929 Graham-Paige 612 touring car 4/13/11 0058B |
|
WANTED: Need
a parts radio for 41 Graham Hollywood...Philco-Studebaker model S-1726.
Also a "Graham" script water heater 1938 to 1941 Graham
heaters will do 5/7/11 0059B |
|
WANTED: left
front fender for
a 1927 3/4 Ton Graham Bros. truck
- 5/24/11 0060B |
Craig |
|
WANTED: Looking
for 1930 Graham Paige Model 822 parts car 0061B |
Terry Reid |
|
WANTED:
a 1938/39 Graham Sharknose any any
shape. Also looking for a pair of NOS headlights for the same car.
0062B |
Alexandre |
|
WANTED:
a pair of Wind Wings and side mirrors for a 1935 model 73 0063B |
Glenn
530-774-7860 |
|
WANTED: for a 1941 Graham Hollywood. Need an original high beam jewel and socket assembly, an original Graham script water heater and defroster duct for the dash. Also one front bumper mounting bracket. Sometimes know as bumper irons, vent window assemblies or parts. Also defroster vent for the top of the dash reproduction is ok. Who makes it?, Oil sender for oil pressure gauge, located on the Supercharger. Bi-Ray headlight lenses and buckets for Hollywood. Deck lid and any rust free doors.
0064B |
|
WANTED:
Rust and dent free gas tank wanted
for a 1939 Sharknose. 0065B |
Dennis Cusack
212.988.4379 |
|
WANTED:
1928 Graham-Paige. Please contact 0066B |
Gerard CHEDIKIAN
PARIS FRANCE TEL: 33 1 58 17 70 53 |
|
WANTED:
Good
morning from Spain. My name is Francisco Jimenez. I have a 1929
Graham-Paige double phaeton. I'm looking for 6-spoke wheels 20" for
my Graham.
09/20/11 0067B |
Francisco Jimenez |
|
WANTED:
a pair of Wind Wings and side mirrors for a 1935
Graham model 73
10/16/11 0068B |
Glenn Irish |
|
WANTED:
Looking for Graham supercharger Volume 37, number 3
Jan, Feb, March 2006. This issue deals with Carter's Garage on the
cover. 10/19/11 0069B |
Kevin Conners
530 378-2553 |
|
WANTED:
Parts for a 1927 Graham Brothers Truck:
1 front grease cap,
1 door hinge, Both outer door handles,
Correct North East ignition coil, Horn button Any help with these items would be greatly appreciated! 10/27/11 0070B |
Bob Senkowski |
|
WANTED:
for
1941 Graham Hollywood: Need
original Oil pressure sending unit. It mounts to the supercharger
10/29/11 0071B |
Tom
Mulligan Tucson
Az |
|
WANTED:
vent window rubber and door weather strip for 1939
Graham club sedan.
11/13/11 0072B |
ED SMITH |
|
WANTED:
For
1940 Graham Sharknose: Clock for glove box door, Hood trim piece that
goes from hood ornament to front of hood, Front cowl trim piece(
about 3 " long) either side, 16 inch rims as mine are rotted, front
fenders if possible, front or rear license plate brackets, hub caps .
1938-39 Sharknose parts may fit also. Thank You 01/02/12 0073B |
Frank
Copenhagen
585-831-2078 |
|
WANTED: One
outside bumper guard for 1941 Graham Hollywood. These are slightly
thinner than the center upright. 01/20/12 0074B |
Terry Allan |
|
WANTED: Need
alloy head for 1936-1937 Graham with 20 studs type.
02/07/12 0075B |
IB Carvalho |
Rules to follow:
1. All items for sale or wanted must be directly Graham related.
2. Ad will run for approximately 1 month unless I am notified earlier that the item has been sold.
3. Please submit your advertisement to me by email and I will let you know when your ad will be posted.
4. Remember to include your email address and/or snail-mail address and as much detail about the car or parts as you can.
